We buy, refurbish and resell bottling machinery: used machines, revised and warrantied

Step-by-step basket advance – plastic baskets for bottles up to 115 mm diameter. All-stainless-steel machine.

Gripper turret electrically height-adjustable. Bottle grippers with rubber pads. Clockwise rotation.

Manual bottle loading and unloading. Automatic carousel rotation. Centrifugal pump with a small stainless-steel tank to inject water through the nozzle.

Fixed bowl. Pneumatic bottle-lifting cylinders from below with air recovery. Two-button filling valves: one for pre-evacuation, one for snifting.

Fixed bowl. Pneumatic bottle-lifting cylinders from below with air recovery. Single-button filling valves for snifting.

Fixed bowl. Pneumatic bottle-lifting cylinders with air recovery. Single-button filling valves for snifting.

Height-adjustable bowl. Spring-loaded mechanical bottle-lifting cylinders. Side and rear safety guards with stainless-steel covers.

Monobloc consisting of: 12-valve light-vacuum filler. Spring-loaded mechanical bottle-lifting cylinders.

Built in 1999. Rated speed 9,000 b/h with standard 0.75 l Bordeaux bottle. Consisting of: 32-gripper rinser, moving nozzles, double treatment.

Fan-generated air pushes the corks. All stainless steel. With electrical control panel.

Feeds straight cork stoppers. Output approx. 4,000 corks/h. All-stainless-steel construction.

Height-adjustable wire-hood closing head. Automatic wire-hood feeding. Long-autonomy wire-hood magazine.

For straight and T-top cork stoppers. Height-adjustable head. Fully painted machine.

For 31.5 × 18 aluminium screw caps. Three-roller capping heads. Height-adjustable head.

Straight cork stoppering. Height-adjustable head. Stainless-steel clad base. Safety guards.

Straight cork stoppering. Head height-adjustable for the various bottle formats. Painted frame.

Straight cork stoppering. Height-adjustable head. Stainless-steel clad base. Safety guards.

Straight cork stoppering. Vacuum before corking. Height-adjustable head. Stainless-steel clad base.

Consisting of: pVC capsule dispenser with inclined-tray magazine. One heat head for shrinking PVC capsules.

2 self-adhesive stations + 2 glue stations. Stainless-steel clad frame. Safety guards.

2 self-adhesive stations, front and back, plus 1 glue station. Anticlockwise rotation.

With 3 self-adhesive stations – front, back and seal label. And one glue station for an inverted-L strip stamp.

With 3 self-adhesive stations. Applies front and back labels and a non-transparent neck band.

With 3 self-adhesive stations and one glue station. Self-adhesive stations adjustable on 3 axes.

Self-adhesive labelling station for case sides.

From 1 lane to multiple lanes. With side guide rails. Various drives for the conveyor chains, complete with supports.

All stainless steel. With variable-speed gearmotor. Movable side rail to release bottles at the outfeed.

With plastic mesh belt. Buffers bottles and feeds them back onto the line. Dimensions: length 3,000 × width 2,000 mm.

For PVC capsules. Heat head for shrinking PVC capsules. Fully stainless-steel clad.

For PVC and polylaminate capsules. With one spinning head for polylaminate capsules.

For PVC and polylaminate capsules. Capsule dispensing by 6-cup drum. Rotary turret with 8 heat heads for shrinking PVC capsules.

Single-cup dispenser. Inclined tray holding the capsules. Rotary turret with 4 spinning heads.

Dispenses and smooths PVC capsules, prepared for polylaminate. One heat head for shrinking PVC capsules.

Dispenses and smooths sparkling-wine foils. One sparkling-wine head folds and smooths at the same time.

Monobloc consisting of: pVC capsule dispenser with closure check. Shutter-type capsule magazine for long autonomy.

With hot-melt bottom sealing, without dividers. Glue melter. Forms and closes various case sizes.

Packs 6 cases of 6 bottles or 4 of 12 per cycle. Mechanical head-group motion. Bottle-gripping head adjustable for different bottle diameters.

Option of 2 bottle-gripping heads 6+6 or one of 12. Stainless-steel bottle accumulation infeed table.

Inserts dividers into two cases per cycle. Painted steel machine. With safety guards.

Consisting of: case erector with single-head case packer. Handles cases of 6 or 12 bottles.

Case erector with hot-melt bottom sealing, Nordson glue melter, vertical case forming.

Cases driven by two side rubber belts. Tape sealing on top and bottom. Adapts to various case sizes.

Various single-lane stainless-steel case conveyors. Suitable for carrying cases. With side guide rails.

Lemic monobloc, clockwise rotation, consisting of: 9-valve light-vacuum filler. Height-adjustable bowl.

Adjustable crushing rollers. Entire machine in stainless steel. Variable destemming speed.

Capacity approx. 50 t/h. Fixed crushing rollers. Crush / no-crush option. Variable beater speed.

Approx. 20 t/h. All stainless steel. Complete with speed variator to adjust the output.

Weighing scale, max 4,000 kg.

Fixed crushing rollers. All parts in contact with the grapes in stainless steel. Painted steel frame.

On wheels. With 2 baskets on wheels.

With 400 mm diameter auger. Discharge door opened and closed by a manual pneumatic control unit.

All stainless steel except the painted steel outer legs. Movable side on the discharge side.

Stainless-steel destemmer cage and beater. Complete with pump. On wheels.

With 90 plastic plates – plate size 400 × 400. Quick manual plate closing by central screw, final tightening with a manual hydraulic unit.

Filter area 4 m². Tilting bell. Horizontal plates. All stainless steel. Tilting bell for cleaning the horizontal plates.

Horizontal filter plates. Automatic cake discharge. DE mixer with dosing pump. Electrical control panel.

Filter area approx. 30 m². Horizontal plates. External filter for the residual volume in the bell.

Filter area 5 m². Horizontal plates. External filter for the residual volume in the bell.

Complete with mixer and automatic DE dosing pump. Automatic cake discharge from the filter plates by vibration.

The system consists of: 2 housings for wine microfiltration. 1 housing for water microfiltration.

System with 2 housings of 12 × 30-inch cartridges. Suitable for wine microfiltration.

With floating lid. Sampling valve. Total drain valve and partial drain valve. Bottom manhole.

With floating lid. Sampling valve. Total drain valve and partial drain valve. Bottom manhole.

With top and bottom manholes. Flush-bottom door for discharging pomace. Partial drain with stainless-steel valve on the door.

Stainless-steel total drain valve. Manhole lid on top.

Stainless-steel total drain valve. Manhole lid on top.

With floating lid. Sampling valve. Total drain valve and partial drain valve. Flat bottom, no legs.

Sampling valve. Total drain valve and partial drain valve. Bottom manhole. Flat bottom, no legs.

With floating lid. Sampling valve. Total drain valve and partial drain valve. On steel legs.

Chills liquids directly below zero as they pass through the scraped-surface body.

Chills liquids down to approx. 5 °C below zero. Stainless-steel scraped-surface body to prevent ice on the wall.

Single-piston pump on wheels, Esmeraldo model 130. Bronze pump body. With flow reverser.

Single-piston pump on wheels, Gioiello model 110. Bronze pump body. With flow reverser.